How to connect IPTV to wifi

time：2025-03-02 08:02:25 Smart Electronics

Unicom IPTV box uses the WiFi connection method

The network cable is connected to the box normally,Press the settings key on the remote control,Enter the settings page (generally you need to enter the password to enter the settings,The default password set by the Unicom ZTE box is:6321.),Find the wired network,Record relevant parameter information,Generally there are IP address、Subnet mask、Gateway、Active DNS、Standby DNS, etc.,You can take a photo or write it down in a notebook,Or record it with a mobile phone; Select Device Information or other settings, find the wired MAC address, and record it. Don't move the others, it's more troublesome if you can't recover if you do. Hardware connections. Connect the network cable on the box to the WAN port of the router. Debugging settings. First of all, the router settings, enter the router management interface, on the network parameter setting page, find the WAN port settings, Internet access mode - select the fixed IP address (some called AP mode), fill in the relevant information just recorded, and save; Then find MAC Address Settings (or Clone) and choose to use a custom MAC address, fill in the MAC address of the box you just recorded, and save.

# Smart Electronics #

《How to connect IPTV to wifi》 This does not represent the views of this website. If there is any infringement, please contact us to delete it.

Latest article

Recommend

Ranking