Glass transmittance tester

time：2024-10-14 09:02:53 Review Insights

1. First of all, the instrument is self-calibrated when it is powered on. Snap the sleeves of the instrument together or place the sleeve on the mount, then press the power button to power on, and the screen will display 100% after the instrument has passed self-calibration. This is where the measurement begins.

2. Next, you can measure directly and place the glass in the card slot of the mount. Data is instantaneous, measured, and displayed. If it is a small glass material, it can be placed directly in the card slot, and if it is a large glass material, the glass can be sandwiched between the sleeves. After the data is measured, if you want to keep the data, press the HOLD button in the middle to lock the data and save the data.

3 . the last is to check , this step can actually be omitted , if you just want to know the light transmittance of a certain glass , the first two parts can be done . The final step is to view the saved data. The third key of the instrument is the view button , and the instrument can save up to 9 sets of data to No . 1 Start to No . 9 is chronologically arranged by the detection . In addition, the instrument has the function of automatically counting the maximum, minimum, and average values of the saved data.

# Review Insights #

《Glass transmittance tester》 This does not represent the views of this website. If there is any infringement, please contact us to delete it.

Latest article

Recommend

Ranking